4
DAP-1820 Install Guide
Method One:
Connect to Your
Router Using WPS
1
Find an available outlet near your wireless router.
Plug in the DAP-1820 and wait until the Status
LED is blinking amber.
2
Press the
WPS
(Wi-Fi Protected Setup) button
on your wireless router.
Within one minute, press the
WPS
button on
the DAP-1820. The Status LED will start to blink.
3
WPS
DAP-1320
There are
two easy ways
to set up your DAP-1820.
It is recommened that you use
Method One
if your router has a WPS
button. If your router does not support WPS or you are not sure, see
Method Two
,
Configure the DAP-1820 Using D-Link Wi-Fi Setup
, on page 6.
