D-Link EasySmart Switch User Manual
3
3
5
5
Click
Apply
for the settings to take effect.
QoS > Bandwidth Control
The Bandwidth Control page allows network managers to define the bandwidth settings for a specified port’s
transmitting and receiving data rates.
Figure 296– QoS > Bandwidth Control
From Port / To Port:
A consecutive group of ports may be configured starting with the selected port.
Type:
This drop-down menu allows you to select between
RX
(receive),
TX
(transmit), and
Both
. This setting
will determine whether the bandwidth ceiling is applied to receiving, transmitting, or both receiving and
transmitting packets.
No Limit:
This drop-down menu allows you to specify that the selected port will have no bandwidth limit.
Enabled
disables the limit.
Rate:
This drop-down menu allows you to select data rate from 64Kbps to 512Mbps.
Click
Apply
to set the bandwidth control for the selected ports.
Security > MAC Address Table > Static MAC
This feature provides two distinct functions. The
Disable Auto Learning Excluding Uplink Port
table allows
turning off the function of learning MAC address automatically, if a port isn't specified as an uplink port (for
example, connects to a DHCP Server or Gateway). By default, this feature is Off (disabled).
