D-Link EAGLE PRO AI Скачать руководство пользователя страница 164

159

D-Link  G415 User Manual

Appendix E  - Regulatory Information

NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY (FOR WIRELESS PRODUCT ONLY):

•  This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the 

potential for interference.

•  This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This 

equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, 

CI, HU, and CY.

Usage Notes:

•  To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the 

products according to the country where the equipment will be deployed.

•  This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication 

between two client devices without an Access Point.

•  Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in 

5 GHz band within the EU.

•  Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz and/or 5 GHz wireless.

HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPÄISCHEN GEMEINSCHAFT ( NUR FÜR 

EIN DRAHTLOSES PRODUKT )

•  Der Betrieb dieses Geräts in der Europäischen Gemeinschaft bei Nutzung von Kanälen im 5,15-5,35 GHz Frequenzband ist ausschließlich auf 

Innenräume beschränkt, um das Interferenzpotential zu reduzieren.

•  Bei diesem Gerät handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Ländern - ausgenommen Frankreich. Der 

Betrieb dieses Geräts ist in den folgenden Ländern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, 

PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY

Gebrauchshinweise:

•  Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und 

Kanalbeschränkungen, dem jeweiligen Land, in dem das Gerät zum Einsatz kommt, entsprechend, auf die Produkte angewandt.

•  Die Funktionalität im Ad-hoc-Modus bei Betrieb auf 5 GHz ist für dieses Gerät eingeschränkt. Bei dem Ad-hoc-Modus handelt es sich um eine 

Peer-to-Peer-Kommunikation zwischen zwei Client-Geräten ohneeinen Access Point.

•  Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb 

auf 5 GHz innerhalb der EU.

•  Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt.

Содержание EAGLE PRO AI

















































































































































































Отзывы: