65
D-Link M15 User Manual
Section 3 - Configuration
If you click on Edit or Add Route, the following options will appear:
Name
Enter a name for the route.
DestNetwork
Enter the destination IPv6 address of the subnetwork or the prefix,
for example, 2010:db9:abcd:1234::
PrefixLen
Enter the prefix length, which is the number of prefix bits of the IPv6
address. Enter a value between 64 and 128.
Gateway
Enter the IP address of the next hop, which is the gateway to the
remote network.
Metric
The route metric is a value from 1 to 16 that indicates the cost of using
this route. A value of 1 is the lowest cost and 128 is the highest cost.
Interface
Select the interface that the IP packet must use to transit out of the
device when this route is used.
Click
Apply
when you are done.
IPv6
Go to
Features > Static Routes
, then click
IPv6
to configure the IPv6 Static
Routes.
To configure the Static Route IPv4 settings, click the
IPv4
tab. Refer to
If you wish to remove a rule, click
in the Delete column. If you wish to edit a
rule, click
in the Edit column. If you wish to create a new rule, click the
Add
Rule
button.