D-Link DXS-1210 Series, Руководство по установке оборудования

Страница: 27 / 50

DXS-1210 Series 10 Gigabit Ethernet Smart Managed Switch Hardware Installation Guide
22
Performance Specification
Feature Description
Switching Capacity DXS-1210-28T 680 Gbps
DXS-1210-28S 560 Gbps
MAC Address Table Up to 32K entries (256 static MAC addresses)
Transmission Method Store and forward
Packet Buffer DXS-1210-28T 4 MB
DXS-1210-28S 4 MB
Packet Forwarding
Rate
(Maximum)
DXS-1210-28T 505.92 Mpps
DXS-1210-28S 416.64 Mpps
Priority Queues Supports the following:

Maximum of 8 Priority Queues per port
Link Aggregation Supports the following:

Maximum of 8 groups per device

Maximum of 8 ports per group
Static Routes Supports the following:

Maximum of 128 static IPv4 routes (shared with IPv6)

Maximum of 64 static IPv6 routes (shared with IPv4)
Access Control List
(ACL) Entries Supports the following:

Maximum of 1536 ingress ACL entries

Maximum of 1024 egress ACL entries
Port Type Specifications
Feature Description
Console Port The RJ45 console port provides out-of-band access to the CLI using the following
settings:
Baud Rate 115200 (default), 19200, 38400, and 9600 bps
Data Bits 8
Stop Bit 1
Parity None
Flow Control None
RJ45 Ports The RJ45 Ethernet ports provides in-band access to SNMP, the CLI and Web UI,
interconnect nodes, and support the following standards and features:
Standards IEEE 802.3u (100BASE-TX)
IEEE 802.3ab (1000BASE-T)
IEEE 802.3an (10GBASE-T)
IEEE 802.3az (Energy-Efficient Ethernet)
IEEE 802.3x (Full-Duplex, Flow Control)
The following features are supported on the RJ45 ports:

Full-duplex operations on 100BASE-TX ports

Head-of-line blocking prevention

Manual/auto MDI/MDIX configuration

Auto-Negotiation for each port