D-Link DXS-1210-28T, Быстрое руководство по установке

Страница: 7 / 22

E) Fasten the tie of the Retainer until the power cord is secured.
Switch Connections
Switch to End Node
An end node is a generic name for edge networking devices that will be connected to this switch. Typical
examples of end nodes are Personal Computers (PCs), Notebooks, Access Points, Print Servers, VoIP
Phones and more. Each end node should be fitted with an RJ45 networking port. Normally, end nodes will
connect to this switch by using a standard twisted-pair UTP/STP network cable. When a successful con-
nection is established, the corresponding port light will illuminate and blink to indicate that network activity
is taking place on that port.
Switch to Another Switch
The Switch can be used to connect to any other switch or hub in the network. This network topology is
used when the Switch does not have enough ports to cater for all the end nodes in the network.
There is a great deal of flexibility on how connections are made using the appropriate cabling.
• Connect a 100Base-TX switch port to the Switch via a Category 5 UTP/STP cable.
• Connect a 1000Base-T switch port to the Switch via a Category 5e UTP/STP cable.
• Connect a 10GBase-T switch port to the Switch via a Category 6/6a/7 UTP/STP cable.
• Connect a fiber, uplink, switch port to the Switch's SFP28 port via a fiber optical cable.
7