D-Link 10 Gigabit Ethernet Switch User Manual
7
7
7
7
Figure 4.107 – L2 Features > LLDP > LLDP Port Settings
The fields that can be configured are described below:
From Port / To Port:
Select the appropriate port range used for the configuration here.
Subtype:
Select the subtype of LLDP TLV(s). Options to choose from are
MAC Address
and
Local
.
Admin State:
Select the local LLDP agent and allow it to send and receive LLDP frames on the port.
Options to choose from are
TX
,
RX
,
TX and RX
, and
Disabled
.
TX -
The local LLDP agent can only transmit LLDP frames.
RX -
The local LLDP agent can only receive LLDP frames.
TX and RX -
The local LLDP agent can both transmit and receive LLDP frames. This is the default
value.
Disabled -
The local LLDP agent can neither transmit nor receive LLDP frames.
IP Subtype:
Select the type of the IP address information to be sent. Options to choose from are
Default
,
IPv4
and
IPv6
.
Action:
Enable or disable the action field.
Address:
Enter the IPv4 or IPv6 address that will be sent.
Click
Apply
to accept the changes made.
NOTE:
The IPv4 or IPv6 address entered here
should be an existing LLDP management IP
address.
L2 Features > LLDP > LLDP Management Address List
This window is used to view the LLDP management address list.
Figure 4.108 – L2 Features > LLDP > LLDP Management Address List
