D-Link 10 Gigabit Ethernet Switch User Manual
4
4
8
8
Click
Add
to add a new entry based on the information entered.
Click
Delete
to remove the specified entry.
Enter a page number and click
Go
to navigate to a specific page when multiple pages exist.
Management > RMON > RMON Event Settings
This window is used to configure and display event entries.
Figure 4.60 – Management > RMON > RMON Event Settings
The fields that can be configured are described below:
Index:
Enter the index of the alarm entry between 1 and 65535.
Description:
Enter a description for the RMON event entry. The string is up to 127 characters long.
Type:
Select the RMON event entry type. Options to choose from are
None
,
Log
,
Trap
, and
Log and Trap
.
Community:
Enter the community string. The string can be up to 127 characters.
Owner:
Enter the owner string. The string can be up to 127 characters.
Click
Add
to add a new entry based on the information entered.
Click
Delete
to remove the specified entry.
Click
View Logs
to see the detail information of the specific port.
Enter a page number and click
Go
to navigate to a specific page when multiple pages exist.
After clicking
View Logs
, the following window will appear.
Figure 4.61 – Management > RMON > Event Logs Table
Click
Back
to return to the previous window.
Management > Web
This window is used to configure the Web settings on the Switch.
