DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Configuring via Web-based Interface
Telnet
On the
System / Telnet
page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is disabled.
Figure 190. The
System / Telnet
page.
To enable access via TELNET, move the
Enable Telnet
switch to the right. In the
Port
field, enter
the number of the router's port through which access will be allowed (by default, the port
23
is
specified). Then click the
APPLY
button.
To disable access via TELNET again, move the
Enable Telnet
switch to the left and click the
APPLY
button.
Page
254
of 266