DWR-980
Wireless AC1200 4G LTE Router with VDSL2 Support,
Gigabit Ethernet Ports, and 2 FXS Ports
User Manual
Configuring via Web-based Interface
Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection
To create a connection of the PPPoE IPv6 or PPPoE Dual Stack type, click the
ADD
button (
)
on the
Connections Setup / WAN
page in the
Connections List
section. On the opened page,
go to the
All Settings
tab. Then select the relevant value from the
Connection Type
drop-down
list and specify the needed values.
Figure 80. The page for creating a new
PPPoE IPv6
connection. Selecting a connection type.
Parameter
Description
Interface
A physical interface to which the new connection will be assigned.
In order to create an Ethernet WAN connection, select the
WAN
value or the value corresponding to the LAN port specified as the
WAN port.
In order to create a VDSL WAN connection, select the
PTM
value.
In order to create an ADSL WAN connection, select the value
corresponding to the existing interface or the
Add new ATM PVC
value for creating a new interface at the physical layer.
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Connection name
A name for the connection for easier identification.
Page
102
of 266
