DWR-720
3
E
N
G
LI
S
H
PRODUCT
SETUP
WIRELESS WEB-BASED SETUP
1. Power on the DWR-720 and connect it to your PC using the
supplied Micro USB cable.
2. Use a web browser to go to
http://192.168.0.1
/ to log into the
router’s configuration interface. The default username is
admin
,
and by default the password should be left blank. Follow the
Web-Based Configuration utility wizard to complete the setup of
your DWR-720.
InstallShield Wizard
Welcome to the InstallShield Wizard for
DWR-720 USB Modem
1. Power on the DWR-720 and connect your device to the dlink_
DWR-720_xxxx wireless network, where xxxx represents the
last four digits of the DWR-720’s MAC address. This wireless
network name as well as the password is printed on the label
under the battery.
2. Use a web browser to go to
http://192.168.0.1
/ to log into the
router’s configuration interface. The default username is
admin
,
and the password should be left blank.
If you wish to connect to the DWR-720 using a USB cable, please follow the instructions below:
USB WEB-BASED SETUP
