D-Link DWR-118 Скачать руководство пользователя страница 10

Страница: 10 / 95

D-Link DWR-118 User Manual

Section 2 - Installation

Before You Begin

Installation

This section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area

such as a closet, cabinet, or in an attic or garage.

1. Ensure that your DWR-118 Wireless AC750 Dual-Band Multi-WAN Router is disconnected and powered off.

2. To use your 3G / 4G Internet connection, insert a 3G / 4G USB dongle into the USB port on the top of the device.

3. To use your WAN connection, insert your Internet/WAN network cable into the WAN port on the back of the router.

Note:

The 3G/4G connection can also be used as a backup WAN. Once a backup is configured, the router will automatically use 3G / 4G for the

Internet connection if the Ethernet WAN is not available.

4. Insert the Ethernet cable into the LAN Port 1 on the back panel of the DWR-118 Wireless AC750 Dual-Band Multi-WAN Router and an available

Ethernet port on the network adapter in the computer you will use to configure the router.

Note:

The DWR-118 Wireless AC750 Dual-Band Multi-WAN Router LAN Ports are Auto-MDI/MDIX, so both patch and crossover Ethernet cables

can be used.

5. Connect the power adapter to the socket on the back panel of your DWR-118 Wireless AC750 Dual-Band Multi-WAN Router. Plug the other end

of the power adapter into a wall outlet or power strip and turn the device on.

a. The Status LED will light up to indicate that power has been supplied to the router.
b. The LEDs on the front panel will flash on and off as the DWR-118 Wireless AC750 Dual-Band Multi-WAN Router performs initialization and

Internet connection processes.

c. After a few moments, if a connection has been established, the following LEDs will turn solid green: Power, Status, WAN, WLAN, and any LAN

Port LEDs that are connected to computers or other devices.

Содержание DWR-118
































































































Результаты поиска

Содержание DWR-118

Отзывы:

D-Link DWR-118, Руководство пользователя, Страница: 10 / 95

Результаты поиска

Содержание DWR-118

Отзывы: