D-Link DWL-G630 - AirPlus G 802.11g Wireless PC..., Руководство пользователя

Страница: 16 / 52

16
Link Info
Using the Con fi guration Utility (continued)
After clicking on the Con fi guration Utility icon, the Link Info screen will dis-
play the settings for the DWL-G630:
SSID:
The Service Set Identifier is
the name assigned to the wire-
less network. The factory SSID
setting is default .
Tx Rate:
Tx Rate settings are automatically determined for an optimal speed up to a
maximum of 54Mbps.
Status:
Displays the MAC address of
the access point or router to
which the DWL-G630 is asso-
ciated.
Channel:
The channel selection is automatically determined by the DWL-G630.
Frequency:
802.11g indicates that the
DWL-G630 is communicating
in the 2.4GHz band.
Encryption:
You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here.
Wireless Mode:
Either Infrastructure or Ad-Hoc will be displayed here. (Please see the Get-
ting Started section in this manual for an explanation of these two modes.)
Signal Strength/Link Quality:
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Rescan Button:
Rescans for the strongest signal in your environment and associates with
that access point or router.
Displays the Link Quality for the DWL-G630 wireless connection to the ac-
cess point. The signal strength represents the wireless signal between the
access point and the DWL-G630. The percentage coincides with the graphi-
Authentication:
If Authentication is in use; it will be indicated here.