D-Link DWL-8620APE, Быстрое руководство по установке, Страница: 3 / 26

D-Link DWL-8620APE Quick Install Guide

3
E
NG
LIS
H
Figure 2. DWL-8620APE Rear Panel
Interface Connectors
Powering the Access Point
The DWL-8620APE can be powered using
one of the following methods:
• (Optional) Connect the supplied power
adapter.
OR
• Use a standard Ethernet cable
to connect LAN port 1 on the
DWL-8620APE to a PoE power source
device such as a PoE switch or PoE
injector.
Hardware Installation
Connecting through a switch or router:
Connect the access point and the computer
to the same switch or router. If the access
point did not acquire an IP address from
a DHCP server on the network, enter the
default IP address of the access point
10.90.90.91 in the address field of your
browser. If the access is automatically
assigned an IP address by a DHCP server
on your network, enter the IP address
assigned to the access point into the web
browser. To log in, use the default login
information:
Username: admin
Password:
admin
Switch or
Router
Computer DWL-8620APE
Computer DWL-8620APE
Configuring the Access Point
To set up and manage the DWL-8620APE ,
use one of the following methods:
Direct connection to a PC:
Connect the access point and the computer
directly via a straight-through Ethernet
cable. Ensure the computer is configured
with a static IP address in the 10.90.90.0/24
subnet. Launch a web browser, type the
default IP address of the access point
( http://10.90.90.91 ), then press Enter.
To log in, use the default login information:
Username: admin
Password: admin
Power Button
Power Receptor
LAN 1 Port (PoE)
LAN 2 Port
Console Port
Reset Button
Figure 3. DWL-8620APE Front Panel
Figure 4. SMA Connector
Kensington Lock
LAN2 LAN1
SMA
Connector
SMA
Connector