D-Link DWL-8620AP, Быстрое руководство по установке

Страница: 3 / 24

D-Link DWL-8620AP Quick Install Guide

3
E
NG
LIS
H
Figure 2. DWL-8620AP Rear Panel
Interface Connectors
Powering the Access Point
The DWL-8620AP can be powered using
one of the following methods:
• (Optional) Connect the supplied power
adapter.
OR
• Use a standard Ethernet cable to
connect LAN port 1 on the DWL-8620AP
to a PoE power source device such as a
PoE switch or PoE injector.
Hardware Installation Connecting through a switch or router:
Connect the access point and the computer
to the same switch or router. If the access
point did not acquire an IP address from
a DHCP server on the network, enter the
default IP address of the access point
10.90.90.91 in the address field of your
browser. If the access is automatically
assigned an IP address by a DHCP server
on your network, enter the IP address
assigned to the access point into the web
browser. To log in, use the default login
information:
Username: admin
Password:
admin
Switch or
Router
Computer DWL-8620AP
Computer DWL-8620AP
Configuring the Access Point
To set up and manage the DWL-8620AP ,
use one of the following methods:
Direct connection to a PC:
Connect the access point and the computer
directly via a straight-through Ethernet
cable. Ensure the computer is configured
with a static IP address in the 10.90.90.0/24
subnet. Launch a web browser, type the
default IP address of the access point
( http://10.90.90.91 ), then press Enter.
To log in, use the default login information:
Username: admin
Password: admin
Power Button
Power Receptor
LAN 1 Port (PoE)
LAN 2 Port
Console Port
Reset Button
Figure 3. DWL-8620AP Front Panel
Kensington Lock
LAN2 LAN1