D-Link DWL-6600AP Quick Install Guide
7
E
N
G
LIS
H
Solid Wall or Ceiling
Installation
1. Place the plastic wall mounting ring on a
wall or ceiling.
7. Plug the CAT 5 cable into the LAN port
on the access point.
5. To attach the access point to the
mounting ring, first locate the right side
of the access point that has a small lock
symbol on it, and make sure to line up
this side with the side of the mounting
ring that has Open - Close written on it.
6. Twist counterclockwise to lock the access
point onto the ring. The lock symbol on
the access point must point directly to the
Close
text on the mounting ring.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
3. Drill holes in the marked points and
insert the plastic wall anchors.
4. Use the supplied screws to attach the
mounting ring to the wall.
