4
D-Link DWL-3600AP Quick Install Guide
Power on the access point
To power on the DWL-3600AP, you can use ONE of the following methods:
1. Connect the supplied power adapter
OR
2. Plug one end of an Ethernet cable into the LAN port of the DWL-3600AP and the
other end into a port on a power over Ethernet (PoE) switch.
Configure the access point
To set up and manage the DWL-3600AP, use one of the following methods:
•
Manage the access point from the computer: Connect the access point and your
computer directly via a straight-through Ethernet cable.
•
Manage the access point from the computer via the Switch or Router: Connect
the access point and your computer to the same switch or router.
•
Manage the access point from the computer via the Unified Wireless Switch or
Wireless Controller: Connect the access point to a Unified Wireless Switch or
Wireless Controller. Connect your computer to the same network as that of the
Unified Wireless Switch or Wireless Controller.
Installation
