D-Link DWL-3500AP, Руководство администратора

Страница: 107 / 166

Configuring WPA/WPA2 Personal on a Client 107
A Wireless Client Settings and RADIUS Server Setup
1. Configure WPA/WPA2 Personal (PSK) security on each client as follows.
2. Configure the following settings on the Association tab on the Network Properties dialog.
3. Configure the following settings on the Authentication tab on the Network Properties
dialog.
4. Click OK on the Wireless Network Properties dialog to close it and save your changes.
WPA-PSK clients should now be able to associate and authenticate with the access point. As a
client, you will not be prompted for a key. The TKIP or AES key you configured on the client
security settings is automatically used when you connect.
Network Authentication WPA-PSK
Data Encryption TKIP or AES depending on how this option is configured on the
access point.
Note: When the Cipher Suite on the access point is set to “Both”, then
TKIP clients with a valid TKIP key and AES clients with a valid
CCMP (AES) key can associate with the access point.
Network Key Provide the key you entered on the access point Security settings for
the cipher suite you are using.
For example, if the key on the access point is set to use a TKIP key of
“012345678”, then a TKIP client specify this same string as the
network key.
The key is provided for me
automatically This box should be disabled automatically based on other settings.
Enable IEEE 802.1X
authentication for this
network Make sure that IEEE 802.1X authentication is disabled (unchecked).
(Setting the encryption mode to WEP should automatically disable
authentication.)
Choose either TKIP or AES for
the Data Encryption mode
Enter a network key that matches
the one specified on the access
Choose WPA-PSK
point (and confirm by re-typing)