Wireless Controller
CLI Reference Guide
56
5
type
Enable/disable remote mgmt over https.
Unsigned integer
6
from_address
Set the starting IP in case of range, and the IP to be
allow ed access in case of granting access to a particular
machine
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
7
end_address
Set the Ending IP in case of range.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
8
port
Set the port you w ant to use for HTTP.
Unsigned integer
9
Status
Enable/disable remote snmp.
Boolean choice
9.6 system remote_management telnet
configure
S.No
Com mand Nam e
Description
Type and Description
1
save
save access Management changes for telnet.
2
exit
Save access Management changes for telnet and exit
current mode.
3
cancel
Roll back Remote Mgmt changes.
4
enable
Enable/disable remote mgmt over telnet.
Boolean choice
5
type
The kind of access you w ant to allow .
Unsigned integer
6
from_address
Set the starting IP in case of range, and the IP to be
allow ed access in case of granting access to a particular
machine
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
7
to_address
Set the Ending IP in case of range.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
9.7 system snmp trap configure
<ltagent_ip>
S.No
Com mand Nam e
Description
Type and Description
1
<ltagent_ip>
SNMP trap configuration mode.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
2
save
Save SNMP trap configuration changes.
3
exit
Save SNMP trap configuration changes and exit current
mode.
4
cancel
Roll back snmp configuration changes.
5
agent
The IP address of the SNMP agent.
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
6
snmp_version
Snmp Version v1/v2/v3
String
7
port
SNMP trap port the trap messages w ill be sent to.
Port number
8
community
The community string to w hich the agent belongs. Most
agents are configured to listen for traps in the Public
community
String
