7
D-Link DWA-130 User Manual
Section 2 - Installation
Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager before installing
your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software is uninstalled.
Getting Started
Before installing your new D-Link wireless adapter, please verify the following:
• Remove any previous installations of wireless adapters.
• Disable any built-in wireless and Ethernet adapters.
• Verify the settings such as the SSID and security settings of the network(s) you want to connect to.
Remove Existing Installations
If you’ve installed a different manufacture’s adapter or a different model D-Link adapter, make sure the software is uninstalled before installing
the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different times, make sure the
utilities are not set to load when your computer boots up. Windows® users may use the built-in wireless utility for all adapters.
To remove any old software:
Windows® 8 users: Press
Windows Key
+
Q
>
Control Panel
>
Uninstall Programs
.
Windows® 7 users: Click
Start
>
Control Panel
>
Uninstall Programs
.
Windows Vista® users: Click
Start
>
Control Panel
>
Add or Remove Programs
.
Windows® XP users: Click
Start
>
Control Panel
>
Add or Remove Programs
.
