27
D-Link DVS-210-1 User Manual
Motion Detection
Enabling Video Motion will turn on the motion detection feature. You may draw a finite motion area that will be used for monitoring.
Enable Video
Motion:
Sensitivity:
Percentage:
Draw Motion Area:
Erase Motion Area:
Select this box to enable the motion detection feature.
Specifies the measurable difference between two sequential
images that would indicate motion. Please enter a value between
0 and 100.
Specifies the amount of motion in the window being monitored
that is required to initiate an alert. If this is set to 100%, motion
is detected within the whole window will trigger a snapshot.
Draw the motion detection area by dragging your mouse in the
window (indicated by the red square).
To erase a motion detection area, simply click on the red square
that you wish to remove.
Right clicking on the camera image brings up the following menu
options:
Select All:
Draws a motion detection area over the entire
screen.
Clear All:
Clears any motion detection areas that have been
drawn.
Restore:
Restores the previously specified motion detection
areas.