D-Link DVG-N5412SP Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 115

D-Link DVG-N5412SP Скачать руководство пользователя страница 72

DVG-N5412SP User’s Manual

ADVANCED

D-Link Systems, Inc.

72

SIP Caller ID Obtaining:

Select the part of the SIP packet from the VoIP Gateway to obtain Caller ID.

There are several places where the Caller ID is located.

Remote-Party-ID Display Name -

It is located at SIP

→

Remote-Party-ID

→

Before [<sip:]

Remote-Party-ID User Name -

It is located at SIP

→

Remote-Party-ID

→

After [<sip:], Before [@]

From-Header Display Name -

The standard way is in SIP

→

Message Header

→

From

→

SIP

Display info.

From-Header User Name -

It locates at SIP -> Message Header -> From -> SIP from address before

[@].

Put Caller ID In URI:

This feature is to put Caller ID in URL. The Caller ID is located in SIP

→

Message

Header

→

After [From:], Before [<sip:] by default settings. It will be located in SIP

→

Message Header

→

After [<sip:], Before [@]if ticked.

INVITE With Remote-Party-ID Header:

Check the box to comprise the information of Remote-Party-ID in

the message header of INVITE. Different format of INVITE header might cause the call not to be connected.
Please consult with your VoIP Service Provider before enabling it.

Callee Quick Media:

DVG-N5412SP will send RTP to remote party immediately as user answer an

inbound call.

FXS Hunting For Unknown Number:

Select the response for an incoming call which the called number is

not exist in on the DVG.

Disable –

DVG responses 404 not fornd.

Hunt and Transit Dial –

DVG sends alert to an available FXS port and dial the number to PBX as the

FXS port picked up by PBX. It works with SoftSwitch or IPPBX to allow a remote client reach the PBX
extension for one step dial. (For virtual extension)

FXS Group Hunting/ Ring Type --

DVG sends alert to an available FXS port for hunting group.

Support URI Percent-Encoding(RFC 3986):

Check the box to encode/decode the letters of the basic

Latin alphabet, digits, and a few special characters which follow RFC 3986.

Call Hold Compatible With RFC 2543:

It is used to set the procedure of Call Hold being compatible with

RFC 2543.

«
...
70
71
72
73
74
...
»

Содержание DVG-N5412SP




















































































































Отзывы:

Нет отзывов