D-Link DVG-G1402S - Wireless Broadband VoIP Router, Руководство пользователя

Страница: 42 / 61

DVG-G1402S User’s Manual
42
D-Link Systems, Inc.
Using the Configuration Utility (continued)
Using the Configuration Utility
Call Waiting Alert Tone:
T.38:
MTU Size:
UPnP:
IPSec Passthrough/PPTP
Passthrough:
PPPoE Passthrough:
WAN Port Speed Selection:
Apply:
Advanced > NAT > Misc (continued)
Click
Apply
to save your settings.
The device supports VPN (Virtual Private Network) pass-through
for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP
Security). Once IPSec or PPTP pass-through is enabled, there is
no need to open up virtual services. Multiple VPN connections can
be made through the device. This is useful when you have many
VPN clients on the local area network.
Enter the MTU (Maximum Transmission Unit). The default setting
(for most cable providers) is 1500. Most DSL providers use 1492.
This is used to enable or disable the call waiting alert tone.
Select to enable or disable UPnP™ (Universal Plug and Play).
Which allow user to select their WAN port speed of the device:
100Mbps Full/Half, 10Mbps Full/Half or Auto.
This is used to enable or disable the t.38 protocol. T.38 is a standard
for sending FAX across IP networks.
Select to enable or disable PPPoE passthrough.