16
IP Configuration (Setting WAN Port)
There are four methods of obtaining a WAN port IP address:
1. Static
IP
2. DHCP, means a Dynamic IP (Cable Modem)
3. PPPoE (Dialup ADSL)
4. PPTP.
Using the DHCP and PPPoE for obtaining an IP address may vary. If not familiar with the
network connection, please contact your local ISP.
Setting Dynamic IP (DHCP)
Click “DHCP” to obtain a Dynamic IP address, then click the “Accept” button at the bottom of the
screen.
Save the settings: Click
System Operation
to select “Save Settings”,
”Restart”, and then click the ”Accept” button. Wait for a while (about 40 seconds), and the system
will obtain the related IP value from the DHCP Server.
NOTE: After the system has obtained a new IP address, if using WAN Port to enter the
Web Configuration Screen, a new IP address has to be used. The same applies to the
following two settings.
Setting Static IP
Select “Static IP” and enter the IP address, Subnet Mask and Default Gateway values. Then
click the “Accept” button at the bottom of the screen.
Save the settings, and then restart the system. Wait for about 40 seconds for the system to
restart.
ADSL PPPoE Settings
Select “PPPoE” Enter the Account Number, Password and Reenter Password to confirm. Then
click the “Accept” button at the bottom.
Save the settings, and then restart the system. The system will take about 49 seconds to restart.
