D-Link DVG-2101S, Быстрое руководство по установке

Страница: 7 / 14

7
4.
Attach one end of the provided phone
cable (gray) to a standard analog
telephone.
5.
Attach the other end of the phone cable to
the phone port labeled
PHONE on the
rear panel of the DVG-2101S.
6.
Unpack the 12V DC Power Adapter that
came with the DVG-2101S. Connect the
power adapter to the power connecter on
the DVG-2101S.
7.
Connect the other end of the power
adapter to an available electrical outlet
(wall socket or surge protector).
Note: Make sure all the cables are
connected tightly and properly.
8.
Restart your PC. The corresponding LEDs would light on to indicate that the
DVG-2101S is ready for initial web configuration.
9.
After finishing your initial configuration as described on the next chapter,
you need to unplug the Ethernet cable from the PC. And attach this end to
the LAN port of your router or Cable/DSL Modem.
The hardware configuration is now complete.