Connecting the Gateway directly to
a Modem and Computer (continued)
e. Connect one end of the Ethernet Cable provided in this package to
the LAN or Ethernet Port on the Cable/DSL Modem.
f.
Connect the other end of the provided
Ethernet Cable to the WAN Port of the
gateway.
g. Connect one end of one of the prov
ided phone cables to
a standard analog telephone.
h. Connect the other end of the cable to
the RJ-21 port on the rear panel of
the gateway.
i.
Restore power to the Cable/DSL Modem (plug it in or turn on the
power switch).
j. Connect the power cord to the AC Input
and the electrical outlet. Turn the switch ON.
If your ISP registers your computer’s MAC address, see the section labeled
MAC
Cloning for Connections in the user manual on the CD-ROM.
PPPoE Users
, please continue to the next page for additional configuration steps.
Hardware configuration is complete! If your VoIP service is already activated, you
can make phone calls now.
5
k. Restart your PC.
