DVG-2032S/2016S User’s Manual
VoIP Gateway Configuration
D-Link Systems, Inc.
33
3-3-6 Hot Line
General Settings
→
Hot Line
Enable:
Tick the check box to enable a line. If some lines are not used, disable them (Pause Function) to
avoid unnecessary waiting when an incoming call is diverting to the line.
Hot Line:
Check to direct the call automatically to a pre-configured destination without any action when the
FXS is off-hook. (ie. as the user picks up the phone). When the FXS is under Hot Line mode, no other
phone numbers can be dialed.
Hot Line No.:
Enter the number for pre-defined destination.
Warm Line:
Enter the time for the call to start with a pause, so the user can dial another number. The call
will be automatically directed to the pre-configured destination within timeout period.
