19
The items on this
window are described
below:
Web-based Management (continued)
Configure LAN Port > RIP > Static Route Configuration (continued)
IP Address -
Type in the IP Address of the subnet or device where packets are
routed.
Subnet Mask -
Type in an appropriate subnet mask that allows the static
route to function.
Gateway -
Type in the IP Address of the gateway used for traffic destined for
the specified subnet or device.
Interface -
Select WAN or LAN Interface.
Metric -
Type in the maximum number of hops allowed for the static route.
State -
Enable or disable the route.
Click
Save
or
Clear
to Save or Clear the settings.