D-Link DUA-2000 Policy Manager User Manual
11
Network Configuration
Use the following steps to configure the Wireless Controller and network devices for use with
the Policy Manager captive portal.
Wireless Controller
These steps can be used to configure the Wireless Controller for use with the captive portal.
The model used in these instructions is the DWS-4026:
1. Give the Wireless Controller an IP address, netmask and default gateway
Navigate to LAN >> Administration >> IP Address.
Set up IP address/ Mask/ Default Gateway.
2. Enable Captive Portal in the Global Configuration
Navigate to LAN >> Security >> Captive Portal >> Global Configuration.
Select Enable Captive Portal then press Submit button.
3. Enable Captive Portal in the Captive Portal Configuration.
Navigate to LAN >> Security >> Captive Portal >> CP Configuration.
Press default entry to edit CP configuration.
Enter Configuration name and Verification mode choose Policy Manager.
Choose RADIUS Auth Server then press submit button.
4. Configure a RADIUS Authentication Server.
Navigate to LAN >> Security >> RADIUS >> RADIUS Authentication Server
Configuration.
Select Add item then enter RADIUS Server Host Address, then chose “Yes” for
Policy Manager.
Enter RADIUS Server Name then select Apply then enter Secret then press submit
button.
5. Discover access points to the use with the Policy Manager.
Navigate to WLAN >> Administration >> Basic Setup >> Discovery.
Enter IP Address Range then press Add button to add IP List into L3/ IP Discovery.
6. Create an Access Point Profile.
Navigate to WLAN >> Administration >> Advanced Configuration >> AP Profiles.
Press default profile then enter profile name.
Select dlink1 SSID and press edit button then enter SSID name and enable Client
QoS.
Policy Manager
Use default settings and authenticate against the local user database or an external
authentication source.
