![D-Link DSR-250 Скачать руководство пользователя страница 71](http://html1.mh-extra.com/html/d-link/dsr-250/dsr-250_cli-reference-manual_3850933071.webp)
Unified Services Router
CLI Reference Guide
69
Sl No
Command Name
Description
Type and Description
5
general_select_
local_gateway
In the event two WAN ports are
configured to connect to an ISP, select
the gateway that will be used as the
local endpoint for this IPsec tunnel.
Vpn Local gateway
(DedicatedWAN/ConfiguredWAN)
6
general_remote_en
d_point_type
Select the type of identifier that you
want to provide for the gateway at the
remote endpoint: IP Address or FQDN
(Fully Qualified Domain Name)
Remote end point type(Ipadress
/fqdn)
7
general_remote_en
d_point ipaddress
IPAdress of the remote host
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255,remote end pointt
8
general_remote_en
d_point fqdn
Full Qualified Domain Name of remote
host
String,remote end point
9
general_enable_mo
de_config
Enables Mode Config feature. Mode
Config is similar to DHCP and is used
to assign IP addresses to remote VPN
clients, like iPhone VPN Client.
ModeConfig Boolean choice (Y/N)
10
general_enable_ne
tbios
enable/disable this to allow NetBIOS
broadcasts to travel over the VPN
tunnel.
netbiosenable Boolean choice
(Y/N)
11
general_enable_ro
llover
Check this box to allow the VPN to
rollover when WAN Mode is set to Auto
Rollover on the WAN Mode page.
RollOver Boolean choice (Y/N)
12
general_protocol
Select protocol of the tunnel
Vpn Protocol (AH/ESP)
13
general_enable_dh
cp
Check this box to allow VPN clients to
connect to your router over IPsec and
get an assigned IP using DHCP.
DHCP over ipsec Boolean (Y/N)
14
general_local_net
work_type
Select the IP addresses on the local
side that will be part of the tunnel. This
can be either a single IP address,
several IP addresses in a range, an
entire subnet, or any IP address that
want to connect.
vpn network type
(ANY/SINGLE/RANGE/SUBNET)
15
general_local_sta
rt_address
IP address from where the range needs
to begin
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
16
general_local_end
_address
IP address where the range needs to
end
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
17
general_local_sub
net_mask
Subnet mask of the subnet used
IP address AAA.BBB.CCC.DDD
where each part is in the range 0-
255
18
general_remote_
network_type
Select the IP addresses on the remote
side that will be part of the tunnel. This
can be either a single IP address,
several IP addresses in a range, an
vpn network type
(ANY/SINGLE/RANGE/SUBNET