D-Link DSR-1000N, Руководство пользователя

Страница: 64 / 200

Unified Services Router User Manual
62
•
Service: ANY means all traffic is affected by this rule. For a specific service
the drop down list has common services, or you can select a custom defined
service.
•
Action & Schedule: Select one of the 4 actions that this rule defines:
BLOCK always, ALLOW always, BLOCK by schedule otherwise ALLOW,
or ALLOW by schedule otherwise BLOCK. A schedule must be
preconfigured in order for it to be available in the dropdown list to assign to
this rule.
•
Source & Destination users: For each relevant category, select the users to which
the rule applies:
•
Any (all users)
•
Single Address (enter an IP address)
•
Address Range (enter the appropriate IP address range)
•
Log: traffic that is filtered by this rule can be logged; this requires configuring the
router’s logging feature separately.
•
QoS Priority: Outbound rules (where To Zone = insecure WAN only) can have the
traffic marked with a QoS priority tag. Select a priority level:
•
Normal-Service: ToS=0 (lowest QoS)
•
Minimize-Cost: ToS=1
•
Maximize-Reliability: ToS=2
•
Maximize-Throughput: ToS=4
•
Minimize-Delay: ToS=8 (highest QoS)
6.
Inbound rules can use Destination NAT (DNAT) for managing traffic from the WAN.
Destination NAT is available when the To Zone = DMZ or secure LAN.
•
With an inbound allow rule you can enter the internal server address that is hosting
the selected service.
•
You can enable port forwarding for an incoming service specific rule (From Zone =
WAN) by selecting the appropriate checkbox. This will allow the selected service
traffic from the internet to reach the appropriate LAN port via a port forwarding
rule.
•
Translate Port Number: With port forwarding, the incoming traffic to be forwarded
to the port number entered here.