D-Link DSM-600, Быстрая установка

Страница: 6 / 22

6 D-Link DSM-600 Quick Install Guide
While facing the back of the DSM-600,
insert the right side of the hard drive into
the case. Once in place, snap down the
left side.
Use the mounting screw to secure the
hard drive to the DSM-600. Replace the
cover and screw the two screws on the
back panel of the DSM-600.
Connect an Ethernet cable to the Ethernet
port located on the back of the DSM-600.
Note: It is required that an Ethernet cable is used during initial setup.