D-Link DSM-510 Quick Install Guide
Select one of two ways to connect video to your DSM-510:
All audio, video, and networking connections are located on the rear
panel of the DSM-510.
Video Connections
Connecting the DSM-510
High-Definition Multimedia Interface (HDMI) supports standard, enhanced, or high-definition
video, plus multi-channel digital audio on a single cable.
Composite Audio/Video Connector
•
Plug the supplied 3.5mm mini-jack
connector into the DSM-510. Plug the
opposite end (the yellow video cable
and the red and white audio cables)
into your television input.
HDMI
•
Plug the HDMI cable into the HDMI
connector on the back panel of the
DSM-510. Plug the opposite end to
the matching HDMI connector on your
television or audio/video system.
Note:
This cable is not supplied.
By default the DSM-510 will automatically detect and switch
between Digital (HDMI) and Analog (Composite) modes.
