40
D-Link DSL-X1852E User Manual
Section 4 - Configuration
NAT Enable:
Network address translation (NAT) translates private IP addresses to
public IP addresses before allowing private IP networks to connect
to the public network. This option is not available for related voice
service types such as VOICE, VOICE_INTERNET, and TR069_VOICE and
TR069.
Authentication
Protocol:
Select the authentication protocol your ISP uses. The options are
Auto
,
PAP
,
MS-CHAP
or
CHAP.
Connect Mode
Select:
Set the connection to be
Always-on
or
Connect-On-Demand
.
If you selected
Connect-On-Demand
, the following option is available:
Maximum Idle
Time:
Enter the amount of time in minutes the router will maintain the
Internet connection before disconnecting it if there is no activity.
IPv6 Settings
IPv6 Message
Fetch Type:
This displays the IP assignment method.
DHCP IPv6 Enable:
Select the IPv6 auto-configuration type:
StateLess Address
AutoConfiguration (SLAAC)
or
Dynamic Host Configuration
Protocol (DHCP)
. If DHCP is selected, enter the default gateway or
leave it blank for automatic configuration.
IPv6 Default
Gateway:
Enter the IP address of the default gateway if DHCP is selected or
leave it blank for automatic configuration.
PD Enable
Enable or disable prefix delegation. Also select the prefix mode:
Auto
or
Manual
. For
Manual
, please enter the prefix address, for
example, 2001:b011:2000:0012::. Enter the prefix information option
by specifying preferred lifetime and valid lifetime for the prefix (600-
4294967295 seconds).
Click
Save
when you are done.