D-Link DSL-7850U VDSL2 Router User Manual
錯誤
錯誤
錯誤
錯誤
!
使用
使用
使用
使用
[
常用
常用
常用
常用
]
索引標籤將
索引標籤將
索引標籤將
索引標籤將
Heading 1
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字
套用到您想要在此處顯示的文字。
。
。
。
Page 30
In this section we can configure the Local Area Network (LAN) parameters.
GroupName:
Select the group name that will be used for this configuration here.
IP Address:
Enter the local IP address for this router here. This IP address is also
used to connect to this device’s Web User Interface.
Please note
that after
changing this IP address you’ll be forced to log into the Web User Interface
again, using the new IP address.
Subnet Mask:
Enter the subnet mask used here.
Enable IGMP Snooping:
Select this option to enable the IGMP snooping option.
Standard Mode:
Select this option to enable the IGMP Snooping standard mode.
Blocking Mode:
Select this option to enable the IGMP Snooping blocking mode.
Disable DHCP Server:
Select this option to disable the DHCP Server option.
Enable DHCP Server:
Select this option to enable the DHCP Server option.
Start IP Address:
Enter the starting IP address used in the DHCP Server pool
here.
End IP Address:
Enter the ending IP address used in the DHCP Server pool here.
Leased Time:
Enter the leased time value used here.
Enable DHCP option 66 TFTP Server IP:
Click the checkbox to enable this option.
Also enter the TFTP server IP address.
In this section the
Static IP Lease List
is displayed.
Click the
Add Entries
button to add a new entry to the list.
Click the
Remove Entries
button to remove entries from the list.
