D-Link DSL-560I, Руководство пользователя

Страница: 17 / 74

DSL-560I ADSL Router User’s Guide
Hardware Installation
In this chapter you will learn about the various connections you will need to make in order to use the Router.
When selecting the location for the Router, make sure to allow room to access the connections on the rear panel.
You will want to place the Router so that you will be able to see the LED indicators on the front panel. Allow
some space above the Router for ventilation to avoid problems with overheating.
It may be convenient for you by placing the Router near the PC which you intend to use for initial Router
configuration.
Connect ADSL Line
Use the standard phone cable that comes with the Router to connect it to your telephone outlet. Simply plug one
end of the cable into the Router’s ADSL port (RJ-11 receptacle) on its rear panel, and insert the other end into
the wall jack. The ADSL connection is the WAN interface. It links the Router to the network service provider’s
backbone infrastructure. This is the Router’s access point to the Internet.
The Router must undergo a negotiation process to establish the terms of the ADSL connection. During this
negotiation the ADSL Link/Activity LED will flash in a steady interval, after the line is established which it will
become steadily On. When the ADSL line traffic starts, it will then begin flashing according to the traffic
activities. If the ADSL line is disconnected, the whole ADSL negotiation process will repeat itself again.
Compuer to Router Connection
You can connect the Router
directly to a 10/100BASE-
TX Ethernet adapter card
(NIC) installed on a PC
using the Ethernet cable
provided as shown in this
diagram.
7