D-Link DSL-320B, Руководство по установке, Страница: 7 / 8

7
Item code: 046330
Enter the following settings, then click
Apply Settings .
Manual ADSL connection Settings:
PPoE/PPPoA
PPPoE/PPPoA Internet Connection Type:
Username: Your broadband username
Password: Your broadband password
Connection Type: PPPoA VC-Mux
MTU: 1400
Idle Time Out: 0
VPI: 0
VCI: 38
See page 5 for the format that your broadband
username will take.
3.
From the ADSL setup page you can choose
either the Setup Wizard or Manual Setup. Tick
Manual Setup .
Troubleshooting
The following table explains what the modem's
status lights mean:
Power Power light not on
Check the power adapter is plugged in.
Check the cable is firmly seated in the
back of the modem.
Check the plug socket is switched on and
working
.
DSL DSL light flashing or off
Check your DSL cable connects your
modem to the microfilter.
Check that your microfilter is connected
properly.
Interference caused by other devices on
your telephone line are a common cause
of problems.
For more information about fitting
Microfilters visit our support pages at:
http://support.plus.net
LAN LAN light flashing or off
Check the Ethernet cable is plugged into
your modem.
Check the Ethernet cable is plugged into a
network socket on your computer.
Test with another Ethernet cable, in case
there’s a problem with the provided one.
Status What the Status light means:
The status light will flash to indicate that a
connection is active.
The status light comes on when you first
switch the modem on. If the light stays on
this means that the modem has failed its
internal test and should be restarted.