3.
Once all the details are entered, click on the
Save & Reboot
button to save the settings and
reboot the modem.
After the modem has rebooted, it will begin to negotiate the ADSL connection for your
account. This will normally take about a minute. Click on
Refresh
on your web browser (or
F5
key) to refresh the
Connection Status
at the bottom right of the
Quick Configuration
webpage.
When the ADSL connection has been established successfully, the ADSL Link LED indicator
will light steady green and the
Connection Status
will report
Connected
. If the ADSL Link
indicator does not light up after a minute or so, please check your ADSL physical phone line
connection. If the
Connection Status
shows
Auth Failure
, please double check all the
settings again under the
Quick Configuration
webpage (eg. case-sensitive for username and
password).
Configure using Web Browser - for Bridge Connection
1.
Double-click on
DSL-300G Config
icon on your Windows desktop; or open up a web
browser and type in
http://
followed by the default LAN IP address of the modem,
10.1.1.1
in
the address
bar of the browser. The URL in the address bar should read
http://10.1.1.1
(or
http://10.1.1.1/hag/pages/home.ssi
if you can already see the
Quick Configuration
webpage
like the one shown below).
2.
On the
Quick Configuration
webpage, select Operation Mode:
Bridge
.
3.
Leave the default Connection Type:
1483 Bridged IP LLC
, VPI:
8
, VCI:
35
.
DO NOT
change these settings unless you are instructed to do so by your ADSL service provider.
4.
Click on the
Save & Reboot
button to save the settings and reboot the modem.
After the modem has rebooted, it will begin to negotiate the ADSL connection for your
account. This will normally take about a minute. When the ADSL connection has been
established successfully, the ADSL Link LED indicator will light steady green. If the ADSL
Link indicator does not light up after a minute or so, please check your ADSL physical phone
line connection again.
Note
Bridge connections often require additional IP address information from your
ADSL service provider. Please make sure you follow the instructions or
document provided to you on how to configure the IP address settings on your
computer. If you are not sure about this, please contact your ADSL service
provider for further details.
6
