D-Link DSL-210, Руководство пользователя

Страница: 6 / 43

DSL-210 USB ADSL Modem User’s Guide
v
Before You Start
In addition to the Modem hardware and software drivers, you will to gather information before you begin
to install the device. Your DSL service provider will give you information required for a successful ADSL
connection. You will use this information when you decide which driver to install and when you configure
the Modem. In order to avoid problems please read this section and make sure you understand all the
prerequisites for proper installation of your new Modem.
Operating System
The D-Link DSL-210 can be used with PCs running Microsoft® Windows 98 Second Edition, Windows
2000, Windows Millennium Edition (ME), Windows XP.
USB Port
In addition to the Windows OS, you will need an available USB (Universal Serial Bus) port, compliant
with the USB 1.1 specification, on your computer. These are commonly installed on newer computers,
however older PCs may require the installation of a suitable USB port.
Additional Software
It may be necessary to install software on your computer that enables the computer to access the
Internet (through computers operated by your ISP or service provider). Additional software must be
installed if you are using what is called a “bridged” connection. For a bridged connection, the
information needed to make and maintain the Internet connection is stored on your computer, not in the
Modem. This type of connection is similar to the arrangement used for analog dial-up modems, but the
connection speed is much faster. Various terms are to describe a bridged ADSL connection including
the term “RFC 1483 Bridge” which is used in this guide.
If your ADSL service is delivered through a PPP (Point to Point Protocol) connection, the information
needed to establish and maintain the Internet connection is stored in the Modem. In this case, it is not
necessary to install software on your computer.
Additional PVC Settings
If you are using multiple virtual connections it will be necessary to provide additional VPI and VCI
values for the device. These numbers define a unique route used on the ATM backbone of the WAN.
Chapter 5 contains instruction on how to set up additional PVCs for accounts using more than one
virtual connection.