D-Link DPR-1260 - RangeBooster G Multifunction Print Server страница 53 Скачать руководство пользователя | Manualshive

Страница: 53 / 55

background image

D-Link DPR-160 User Manual

Appendix E - Warranty

CE Mark Warning:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required
to take adequate measures.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local
D-Link office.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

IC Statement:

The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.

For operation within 5.15 ~ 5.25GHz frequency range, it is restricted to indoor environment, and the antenna of this device must be
integral.

«
...
51
52
53
54
55
»

Содержание DPR-1260 - RangeBooster G Multifunction Print Server
























































Отзывы:

Нет отзывов

Похожие инструкции для DPR-1260 - RangeBooster G Multifunction Print Server

Бренд: D-Link Страницы: 12

Бренд: Samsung Страницы: 199

Бренд: Vxl Страницы: 19

SuperScript 610

Бренд: NEC Страницы: 105

Бренд: Hanin Страницы: 76

UniServer R6900 G5

Бренд: H3C Страницы: 17

Бренд: Rena Страницы: 59

Бренд: Vitek Страницы: 2

Бренд: Evolis Страницы: 45

Бренд: IBM Страницы: 66

Бренд: Fujitsu Siemens Computers Страницы: 68

VarioPrint 4110

Бренд: Oce Страницы: 216

Бренд: TerraMaster Страницы: 13

Бренд: IBM Страницы: 70

Бренд: DNP Страницы: 33

@server xSeries 343

Бренд: IBM Страницы: 193

S510 - ScanSnap - Document Scanner

Бренд: Fujitsu Страницы: 295

JT-H200PR Series

Бренд: Panasonic Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды