DPN-1021G
GPON ONT VoIP Gateway with 1 GPON
Port, 1 10/100/1000Base-T Port, 1 10/100Base-TX Port,
and 1 FXS Port
User Manual
Configuring via Web-based Interface
UPnP IGD
On the
Advanced / UPnP
IGD
page, you can enable the UPnP IGD protocol. The gateway uses
the UPnP IGD protocol for automatic configuration of its parameters for network applications
requiring an incoming connection to the gateway.
Figure 65. The
Advanced / UPnP IGD
page.
If you want to manually specify all parameters needed for network applications, move the
Enable
switch to the left. Then go to the
Firewall / Virtual Servers
page and specify needed settings.
If you want to enable the UPnP IGD protocol in the gateway, move the
Enable
switch to the right.
When the protocol is enabled, the gateway's parameters configured automatically are displayed on
the page:
Parameter
Description
Protocol
A protocol for network packet transmission.
IP
The IP address of a client from the local area network.
Private port
A port of a client's IP address to which traffic is directed from a
public port of the gateway.
Public port
A public port of the gateway from which traffic is directed to a
client's IP address.
Description
Information transmitted by a client's network application.
Page
84
of 145
