background image

DPH-80 Phone User Manual   

 

Using

 the SIP Phone 

 

 

When clicked, this link will display a warning page. Click 

‘yes’

 to reset the phone to 

factory defaults and automatically restart. Click 

‘no’

 on the warning page to return to 

the main page. 

 

Logout 

 

 

When clicked, the 

You have been successfully logged out 

page is displayed and the 

current configuration session is terminated. 

 

Note: 

This page may also be displayed if you provided the wrong username and/or 

password or if your session has been inactive for more than 10 minutes. If you are 

having an active session with the server, any other user accessing the MGCP phone's 
configuration will get the 

Server Busy 

page and will not be allowed access

.

 

  

Using the SIP Phone 

If the SIP phone is configured properly and if the support infrastructure is there, the 

SIP phone will play dial tone on off-hook. You can dial any registered SIP number by 
entering the number followed by ‘#’, ‘#’ signals end of dialing to SIP phone. 

D-Link SIP phone works in 10, 100, and 10/100 Mbps Ethernet environment. It has an 

adjustable handset and speaker volume control and it plays tone for all numerical key 
press.  

LEDs 

 

Link/Activity: Steady on for link up, flashing for activity, off for link down 

 

Speaker LED (Red): indicates speaker on status 

 

Hold (Green): Steady on to indicate Hold status; off means normal 

 24

Содержание DPH-80






























Отзывы: