D-Link DPH-400G, Руководство пользователя

Страница: 73 / 96

receive the RTP stream. Multicast functionkey LED lights yellow.
LCD screen displays the following:
2
、
Press the hold softkey to hold the current multicast session
3
、
Press the end softkey again or multicast functionkey, multicast session can
be stopped
Notice: RTP stream is one side, that is from a sender to a receiver. when the
phone initiates a multicast RTP session in a call,the current call is on hold.
Receive multicast setting
You can set up the phone monitoring 10 different multicast addresses to receive
these multicast RTP stream.
You have two method to receive RTP stream of multicast that can be set up
through the web page: Enable priorities of normal calls and Enable page
Priority:
Enable priorities of normal call by select it, if the incoming RTP stream
priority of multicast lower than the priority of current for normal calls, the
phone will ignore the RTP stream of multicast. If the incoming RTP stream
priority of multicast higher than the priority of current for normal calls,
the phone will receive the RTP stream of multicast, and hold the current call.
Disabled priorities of normal call by select disable, the phone will
ignore all local network RTP stream of multicast.
Options as follows:
1-10:the priority defined for normal calls,1 the highest level,10 the lowest level
Disabled: Ignore all RTP stream of multicast
Enable Page Priority
Page priority determines the phone how to handle the newly received multicast
RTP stream when in a multicast session. Enabled page priority, the phone will
automatically ignore the low priority multicast RTP stream and receive the high
priority multicast RTP stream and hold the current multicast session; If not
enabled, the phone will automatically ignore all incoming multicast RTP stream.
Web page is set as follows: