D-Link DP-303, Руководство пользователя по оборудованию, Страница: 15 / 23

3 Parallel Port Multiprotocol Fast Ethernet Print Server User’s Guide
Unpacking and Installation
7
Installing the Print Server
WARNING: Configuration problems may result if the Print
Server is powered up without first
establishing its network connection. Follow
this procedure to avoid complications at the
configuration stage.
1. Confirm proper operation of each of the printers to be connected
to the Print Server.
2. When you have confirmed proper operation of each printer,
switch its power off.
3. Confirm that your network is operating normally.
4. Connect the Print Server to the network, using the RJ-45
(10Base-T/100Base-TX) connector on the print server’s rear
panel.
5. While each printer is powered off, install a printer cable to
connect its parallel port to the printer port of the Print Server.
6. Switch on each connected printer.
7. Plug the AC power adapter’s DC output plug into the DC 5V
power socket on the rear panel of the Print Server.
8. Plug the power adapter into an electric service outlet. This
will supply power to the Print Server, as it has no external
power switch. The Power/Tx LED on the Print Server’s front
panel should light steady green, and the Print Server’s self-test
will proceed.