D-Link DP-301 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 21

D-Link DP-301 Скачать руководство пользователя страница 7

DP-301 Print Server Hardware Guide

4

Introduction

Network Port

The network port (

RJ-45

receptacle) provides for connection to the network

through 10Base-T Ethernet cabling, or Category 5 twisted-pair cable for
100Base-TX Fast Ethernet. This port has autonegotiation (NWay)
functionality, which enables the DP-301 to automatically negotiate and set
its data rate to the highest rate allowed by its network.

DC Power Input

The DC power input socket has the label:
The power supply included in your DP-301 package is correct for the
DP-301. Substitution of other equipment may void warranty.

LED Indicators

The front panel of the DP-301 comprises three LED
indicators. See "Power-up and Self-Test," Chapter 2,
for LED indications upon starting up the DP-301.
During operations following a normal startup, the
LED indicators provide the following status signals:

♦

Pw/Tx

Steady or flashing green confirms power on.

This indicator blinks (briefly dark) when the
DP-301 is transmitting to the network.

♦

Link/Rx

Steady or flashing green confirms that the DP-301 has a good
connection to the Ethernet or Fast Ethernet network.

This indicator blinks (briefly dark) when the DP-301 is receiving from
the network.

♦

LPT

Lin k / R x

LP T

Pw / Tx

LED

Indicators

«
...
5
6
7
8
9
...
»

Содержание DP-301






















Отзывы:

Нет отзывов