D-Link DNS-726-4 - Network Video Recorder Standalone..., Руководство по эксплуатации продукта

Страница: 41 / 93

7 D-Lnk DNS-722-4/DNS-726-4 User Manual
Secton - Configuraton
Event Setup (DNS-726-4 Only)
Connection lost:
Motion Detected:
Input:
Action is triggered if the connection between the
camera and NVR is lost.
All motions from camera will trigger the action.
External input will trigger the action.
Step.1 : Choose the camera, and then select one of the three events.
Output:
E-mail:
If the event occurs, the system will send a signal to
other connected devices.
If the event occurs, the system will send an E-mail
to the pre-set contacts.
Step.2 : Click the Add button to setup the actions of the
event.
Step.3 : Click the action, and then click the Configure button to modify the details of that action if necessary.
Step.4
: Repeat step 2 through 3 to add more actions.
Step.5 : Repeat step 1 through 3 to set more cameras.
Note:
• In addition, you can also set the event notification for when the hard disk is full.
• The screen will display the event information after you have configured the settings.
Note
Before setting the event Motion from Camera , you must first configure
the motion detection function on your camera
This option may be configured and applied using DNS-726-4.