D-Link DNS-1250-04 страница 45 Скачать руководство пользователя

Страница: 45 / 124



RAID level migration



Disk array transport

Disk Array Degraded

Disk arrays are made up of physical drives. Logical drives are created on
the disk array. When one of the physical drives in a disk array fails, a
RAID 1, 5 and 10 volume will (or in the case of a RAID 6, two drives must
fail):



The operational status of the disk array becomes

Degraded



The operational status of logical drives becomes

Critical



The operational status of physical drive becomes

Dead

Offline

Disk Array Offline

When a disk array and its logical drives go Offline, the data stored in the
logical drives is no longer accessible.



Logical drives based on fault-tolerant disk arrays, RAID 1, 5, and 10, go

Offline

when two physical drives are removed or fail.



RAID 6 can continue to operate when two physical drives are removed

or fail. It will fail when three physical drives are removed or fail.



Logical drives based on non-fault tolerant disk arrays, RAID 0, go

Offline

when a one physical drive is removed or fails.

3.7.4 Disk

Array

Management

To view disk array information:

1. Click

the

Storage

tab.

2. Click

the

Disk Array

button.

3. Mouse-over the disk array you want to see and click the

View

button.

Disk array information includes:



Disk Array ID – DA0, DA1, DA2, etc.

Содержание DNS-1250-04




























































































































Результаты поиска

Содержание DNS-1250-04

Отзывы:

Похожие инструкции для DNS-1250-04

Бренды по названию

Популярные бренды

D-Link DNS-1250-04, Руководство пользователя

Результаты поиска

Содержание DNS-1250-04

Отзывы:

Похожие инструкции для DNS-1250-04

Бренды по названию

Популярные бренды