D-Link DMS-1100-10TP Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 116

background image

D-Link DMS-1100 Series User Manual

55

Figure 4.67 – L2 Features > Auto Surveillance VLAN > MAC Settings and Surveillance Device

L2 Features > Voice VLAN > Voice VLAN Global

The Voice VLAN is a VLAN used to carry voice traffic from an IP phone. As the sound quality of Voice over
IP, is sensitive to delay Quality of service (QoS) for voice traffic should be configured to ensure that voice
traffic is handled with a higher priority.

The switches determine whether a received packet is a voice packet by checking its source MAC address. If
the source MAC addresses of a packet complies with the organizationally unique identifier (OUI) addresses
configured by the system, the packets are determined as voice packets and transmitted in voice VLAN.

Figure 4.68 – L2 Features > Voice VLAN > Voice VLAN Global Settings

The fields that can be configured for

Voice VLAN Global Settings

are described below:

Item

Description

Voice VLAN State

Select to enable or disable Voice VLAN.

VLAN ID (1-4094)

Enter the voice VLAN ID. The value is range from 1 to 4094.

Voice VLAN CoS

Specify the priority of the voice VLAN from 0 to 7.

Aging Time

Enter  the  aging  time  of  surveillance  VLAN.  The  range  is  from  1  to
65535  minutes.  The  default  value  is  720  minutes.  The  aging  time  is
used  to  remove  a  port  from  voice  VLAN  if  the  port  is  an  automatic
VLAN  member.  When  the  last  voice  device  stops  sending  traffic  and
the  MAC  address  of  this  voice  device  is  aged  out,  the  voice  VLAN
aging  timer  will  be  started.  The  port  will  be  removed  from  the  voice
VLAN  after  expiration  of  voice  VLAN  aging  timer.  If  the  voice  traffic
resumes during the aging time, the aging counter will be reset and the
timer will stop.

Table 4.44

Click the

Apply

button to accept the changes made.

L2 Features > Voice VLAN > Voice VLAN Port

The Voice VLAN Port page is used to show the ports voice VLAN information.

«
...
59
60
61
62
63
...
»

Содержание DMS-1100-10TP





















































































































Отзывы:

Нет отзывов

Похожие инструкции для DMS-1100-10TP

Бренд: National Instruments Страницы: 36

Бренд: Enginko Страницы: 19

Бренд: H3C Страницы: 77

PoleVault System A/V Source Inputs

Бренд: Extron electronics Страницы: 4

RealPort Ethernet 10/100

Бренд: Xircom Страницы: 30

Бренд: Tektronix Страницы: 178

TeleCLIENT TC7730 Series

Бренд: ETL Страницы: 83

SteelCentral AppResponse 2180

Бренд: Riverbed Страницы: 82

Бренд: Accton Technology Страницы: 78

Бренд: Dataprobe Страницы: 16

Бренд: Allied Telesis Страницы: 80

Бренд: Conel Страницы: 32

AirBridge VS-YOFIMN-000

Бренд: Vivint Страницы: 2

Бренд: Alcatel-Lucent Страницы: 154

Бренд: ActiveEye Страницы: 35

Бренд: Tripp Lite Страницы: 3

DiskStation Series

Бренд: Synology Страницы: 6

TeleLite 720920 Series

Бренд: Positron Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды