D-Link DMC-920 Скачать руководство пользователя страница 7

The Management Chassis will detect the default reset on the 
DIP switches and display out the status, also the Management 
Chassis can control the function through the management 
system. 

 

Through the optional Media 
Converter Chassis System 
via Management Module, 
you can control the setting of 
this Smart Media Converter. 

To set the Fiber and UTP 
(FDX/HDX), UTP (Auto 
negotiation/Manual), Speed 
(10M/100M), LLR 
(Enable/Disable), LLCF 
(Enable/Disable) 

 

Device Link Setup 

To enable or disable the connection of 
both UTP port and Fiber port 

LLCF Setup 

To enable or disable the LLCF function 
of the device 

M1 AN Setup 

To set the UTP to Auto-negotiation or 
Forced Mode 

M1 Speed Setup 

To set the speed of UTP to 10M or 100M 

M1 DUP Setup 

To set the Duplex Mode of UTP port to 
Full or Half 

M1 FC Setup 

To set the Flow Control of the UTP to 
enable or disable 

M1 Link Setup 

To enable or disable the connection of the 
UTP port 

M2 LLR Setup 

To enable or disable the LLR function of 
the Fiber port 

M2 DUP Setup 

To set the Duplex Mode of Fiber port to 
Full or Half 

M2 Link Setup 

To enable or disable the connection of the 
Fiber port 

 

Содержание DMC-920













Отзывы: