D-Link DMC-700SC - Media Converter - External, Быстрое руководство по установке

Страница: 4 / 16

2
E
N
G
LI
S
H
Rack Installation
This media converter can also be installed into any of
the vacant slots of the specially designed DMC-1000
Media Converter Chassis.
Step 1: Unscrew and pull out the media converter
board from its original housing using the thumb
screw on the converter’s front panel.
Step 2:
Unscrew and remove the bay cover of any
of the empty slots in the chassis.
Step 3:
Place the media converter board into the
vacant chassis slot and secure it using the thumb
screw on the converter’s front panel.
TECHNICAL SUPPORT
dlink.com/support
LEDs Status Indication
PWR
On Powered on
Off Powered off
LINK/ACT
On Link is active
Blinking
Transmitting/receiving
data
Off Link is inactive
FDX/Col
(10/100 Mbps
models only)
On Using Full-Duplex mode
Blinking
Indicates a collision of data
when using Half-Duplex
Off
Device is using Half-
Duplex
100
(10/100 Mbps
models only)
On
Link has negotiated at 100
Mbps
Off
Link has negotiated at 10
Mbps
LED Indicators
The LED indicators give you instant feedback on the
status of the converter.